Cisco ACE-4710-K9 Administration Manual page 232

Reformatting Flash Memory
If the ACE fails to extract a system image from the Grub bootloader, it prompts
you to provide the location of an available system image to backup:
After you reformat the Flash memory, perform the following actions:
•
•
•
•
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-42
Failed to extract system image Information from Grub
backup specific imagefile? (yes/no) [no] yes
Enter Image name: c4710ace-t1k9-mz.A1_7.bin
Saving Image [c4710ace-t1k9-mz.A1_7.bin]
Formatting the cf.....
Unmounting ext3 filesystems...
Unmounting FAT filesystems...
Unmounting done...
Unmounting compact flash filesystems...
format completed successfully
Restoring Image backupimage/scimi-3.bin
kjournald starting.
REXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
starting graceful shutdown
switch/Admin# Unmounting ext3 filesystems...
Unmounting FAT filesystems...
Unmounting done...
Reinstall the ACE software image by using the copy image: command (see
Appendix A, Upgrading Your ACE
Reinstall the ACE license by using the license install command (see
Chapter 3, Managing ACE Software
Import the startup and running-configuration files into the associated context
by using the copy command (see the
Remote Server" section).
Import SSL certificate files and key pair files into the associated context using
by the crypto import command (see the Cisco 4700 Series Application
Control Engine Appliance SSL Configuration Guide).
Chapter 5
Commit interval 5 seconds
Software).
Licenses).
"Loading Configuration Files from a
Managing the ACE Software
OL-11157-01