Table of Contents
Advertisement
Chapter 1
Setting Up the ACE
3.
4.
5.
6.
7.
OL-11157-01
Press Esc when the countdown initiates on the GNU GRUB multiboot loader.
The following GRUB menu appears.
GNU GRUB
version 0.95
******************************************************************
*
image(c4710ace-mz.3.0.0_AB0_0.453.bin)
*
*
image(c4710ace-mz.3.0.0_AB0_0.488.bin)
*
*
*
*
*
******************************************************************
In the GRUB menu, use the arrow keys to select from the ACE images loaded
in Flash memory. The ACE image entry is highlighted in the list.
Type e to edit the kernel command line. From the GRUB menu, choose
.
ignorestartupcfg=1
Press Esc to return to the GRUB menu.
Press enter to boot the selected software version. The ACE boot screen
appears as follows:
kernel=(hd0,0)/ACE_APPLIANCE_RECOVERY_IMAGE.bin ro root=LABEL=/
auto console=tt
yS0,9600n8 quiet bigphysarea=32768 ignorestartupcfg=1
[Linux-bzImage, setup=0x1400, size=0x43ff5d2]
IP-Config: Incomplete network configuration information.
INIT: version 2.85 booting
INIT: Entering runlevel: 3
Testing PCI path ....
This may take some time, Please wait ....
PCI test loop , count 0
PCI path is ready
Starting services...
.
Starting sysmgr processes.. Please wait...Done!!!
switch login: admin
Password: admin
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Modifying the Boot Configuration
(639K lower / 3144640K upper memory)
1-39
Hide quick links:
Advertisement
Table of Contents
