Cisco ACE-4710-K9 Administration Manual page 372

XML Overview
R E V I E W D R A F T - C I S C O C O N F I D E N T I A L
The following example shows the sequence of ACE CLI commands for creating a
real server followed by the associated DTD XML rserver elements for the
commands.
**********************************************************************
Elements, Attributes and Entities required for rserver
**********************************************************************
-->
<!--
probe-name is a string of length 1 to 32.
-->
<!ELEMENT probe_rserver EMPTY>
<!ATTLIST probe_rserver
sense
probe-name
>
<!--
relocation-str length is 1 to 127
-->
<!ELEMENT webhost-redirection EMPTY>
<!ATTLIST webhost-redirection
sense
relocation-string
redirection-code
>
<!--
tyep is optional for host.
ip, probe and weight are valid only when type = host.
address-type is valid only when type=host.
name length is 1 to 32.
webhost-redirection is valid only if type=redirect.
-->
Cisco 4700 Series Application Control Engine Appliance Administration Guide
9-8
[no] rserver [host | redirect] name
[no] conn-limit max maxconns [min minconns]
[no] description string
[no] inservice
[no] ip address {ip_address}
[no] probe name
[no] weight number
CDATA #FIXED
CDATA
(yes | no)
Chapter 9
"no"
#REQUIRED
#IMPLIED
CDATA #REQUIRED
(301 | 302) #IMPLIED
Configuring the XML Interface
OL-11157-01