Chapter 7
Configuring Redundant ACE Appliances
Displaying Redundancy Information
Displaying Redundancy Configurations
Displaying FT Group Information
OL-11157-01
This section describes how you can use the show commands to display
configuration information and statistics for your redundancy configuration and
contains the following topics:
Displaying Redundancy Configurations
•
Displaying FT Group Information
•
Displaying the IDMAP Table
•
Displaying the Redundancy Internal Software History
•
Displaying Memory Statistics
•
•
Displaying Peer Information
Displaying FT Statistics
•
Displaying FT Tracking Information
•
To display redundancy configurations, use the show running-config ft command
in Exec mode. The syntax of this command is:
show running-config ft
For example, enter:
host1/Admin# show running-config ft
To display redundancy statistics per context, use the show ft group command in
Exec mode. The syntax of this command is:
show ft group {brief | {[group_id]{detail | status | summary}}}
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Redundancy Information
7-41