Cisco ACE-4710-K9 Administration Manual page 295

Chapter 7 Configuring Redundant ACE Appliances
Table 7-2
Field
Maintenance
Mode
OL-11157-01
Field Descriptions for the show ft group Command Output
(continued)
Description
Current maintenance mode of the local context in an FT
group. Applications can turn on maintenance mode when
there is an inability to communicate with the peer, license
mismatches, too many application errors, and so on.
Possible states are:
MAINT_MODE_OFF—Maintenance mode is turned
•
off.
MAINT_MODE_PARTIAL— All standby contexts
•
transition to the FSM_FT_STATE_STANDBY_COLD
state (see the
enters this mode if configuration synchronization fails.
MAINT_MODE_FULL—All contexts on the ACE
•
become nonredundant causing their peer contexts to
become active. The ACE enters this mode just before
you reboot the appliance and is used primarily when
you upgrade the ACE software.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Redundancy Information
"My State" field description). The ACE
7-43