Table of Contents
Advertisement
Chapter 4
Configuring Class Maps and Policy Maps
Table 4-11
detail command output.
Table 4-11 Field Descriptions for the show service-policy detail Command
Field
Status
Description
Context Global
Policy
Interface
Service-Policy
Class
Inspect DNS
Inspect HTTP
Inspect FTP
Inspect ICMP
Inspect RTSP
Loadbalance
Nat
Max Length
Strict FTP
URL Logging
ICMP Error
Nat Dynamic
VIP Route Metric Not applicable for the ACE appliance.
OL-11157-01
describes the various fields that can appear in the show service-policy
Output
Description
Status of the policy map as applied in a service policy to a
VLAN interface: Active or Inactive.
Optional description about the policy map.
Status whether the service policy has been applied globally
in configuration mode to all VLAN interfaces for the
context.
VLAN identifier of the interface associated with the service
policy.
Identifier of the policy map.
Identifier of the class map associated with the policy map.
DNS application protocol inspection statistics.
HTTP application protocol inspection statistics.
FTP application protocol inspection statistics.
ICMP application protocol inspection statistics.
RTSP application protocol inspection statistics.
Server load-balancing statistics.
NAT statistics.
Maximum length of a DNS reply.
Status of the strict FTP function for FTP application
protocol inspection: Enabled or Disabled.
Status of the URL logging function for HTTP application
protocol inspection: Enabled or Disabled.
Status of the ICMP error function for ICMP application
protocol inspection: Enabled or Disabled.
NAT pool identifier with the configured interface VLAN.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Viewing Class Maps, Policy Maps, and Service Policies
4-73
Hide quick links:
Advertisement
Table of Contents
