Displaying Service Policy Configuration Information - Cisco ACE-4710-K9 Administration Manual

Viewing Class Maps, Policy Maps, and Service Policies

Displaying Service Policy Configuration Information

Note
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-72
To display service policy statistics, use the show service-policy command in Exec
mode. The statistics that appear in the output are dependent on the configuration
of the associated Layer 3 and Layer 4 policy map. The show service-policy
command displays the following information:
VLAN to which the policy is applied
•
Class map associated with the policy
•
Status of any load-balancing operations
•
The syntax of this command is:
show service-policy policy_name [detail]
The keywords, options, and arguments are as follows:
policy_name—Identifier of an existing policy map that is currently in service
•
(applied to an interface) as an unquoted text string with a maximum of 64
alphanumeric characters.
detail—(Optional) Displays a more detailed listing of policy map statistics
•
and status information.
The ACE updates the counters that the show service-policy command displays
after the applicable connections are closed.
For example, to display the service policy statistics for the
HTTP_INSPECT_L4POLICY policy map, enter:
host1/Admin# show service-policy HTTP_INSPECT_L4POLICY
To clear the service policy statistics, use the clear service-policy command. The
syntax of this command is:
clear service-policy policy_name
For the policy_name argument, enter the identifier of an existing policy map that
is currently in service (applied to an interface).
For example, to clear the statistics for the policy map
REMOTE_MGMT_POLICY that is currently in service, enter:
host1/Admin# clear service-policy REMOTE_MGMT_POLICY
Chapter 4 Configuring Class Maps and Policy Maps
OL-11157-01