Cisco ACE-4710-K9 Administration Manual page 53

Chapter 1 Setting Up the ACE
For example, to display the statistic counters related to the memory code, enter:
switch/Admin# show ntp statistics memory
Table 1-6
output.
Table 1-6
Field
Time since reset
Total peer memory
Free peer memory
Calls to findpeer
New peer allocations
Peer demobilizations
Hash table counts
For example, to display the per-peer statistics counter of a peer, enter:
switch/Admin# show ntp statistics peer 192.168.1.2
Table 1-7
Table 1-7
Field
Remote Host
Local Interface
Time Last Received
Time Until Next Send
Reachability Change
OL-11157-01
describes the fields in the show ntp statistics memory command
Field Descriptions for show ntp statistics memory Command
Description
Time in hours since the ACE was last rebooted.
Total peer memory available for the allocation of
memory to peer structures.
Current available peer memory.
The number of calls to findpeer.
Note
Number of allocations from the free list.
Number of structures freed to the free list.
The count of peers in each hash table.
describes the fields in the show ntp statistics peer command output.
Field Descriptions for show ntp statistics peer Command
Description
IP address of the specified peer.
IP address of specified local interface.
Time that the last NTP response was received.
Length of time until the next send attempt.
The reachability status for the peer.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Synchronizing the ACE with an NTP Server
findpeer is an entry point to the allocation of
memory to peer structures that looks for
matching peer structures in the peer list.
1-27