Displaying Icmp Statistics - Cisco ACE-4710-K9 Administration Manual

Displaying ICMP Statistics

Displaying ICMP Statistics
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-16
Chapter 6
Table 6-11 describes the fields in the show system uptime command output.
Table 6-11 Field Descriptions for the show system uptime Command
Field
System start time
System uptime
Kernel uptime
To display Internet Control Message Protocol (ICMP) statistics, use the show icmp
statistics command. The syntax of this command is:
show icmp statistics
For example, enter:
host1/Admin # show icmp statistics
Use the clear icmp statistics command to clear the ICMP statistics.
Table 6-12 describes the fields in the show icmp statistics command output.
Table 6-12 Field Descriptions for the show icmp-statistics Command
Field
Total Messages
Errors
Echo Request
Echo Reply
Viewing ACE Hardware and Software Configuration Information
Description
Date and time when the ACE was turned on
Length of time that the ACE hardware and software
have been running
Length of time that the operating system (OS) has
been running
Description
Total number of ICMP messages transmitted or
received by the ACE
Number of ICMP error messages transmitted or
received by the ACE
Number of ICMP echo request messages transmitted
or received by the ACE
Number of ICMP echo reply messages transmitted or
received by the ACE
OL-11157-01