Cisco ACE-4710-K9 Administration Manual page 198

Saving Configuration Files
•
•
•
•
•
•
•
•
•
•
•
•
For details on the show running-config output associated with the optional
keywords, see the chapters in the ACE documentation set related to the specific
software functions.
For example, to view the entire contents of the running-configuration file on the
ACE, enter:
host1/Admin# show running-config
Generating configuration....
logging enable
access-list acl1 line 10 extended permit ip any any
rserver type host real1
address 16.1.1.102
inservice
rserver type host real2
address 16.1.1.103
inservice
rserver type host real3
address 16.1.1.105
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-8
dhcp—(Optional) Displays Dynamic Host Configuration Protocol (DHCP)
information.
domain—(Optional) Displays the list of domains configured for the current
context. The ACE also displays configuration information for each domain
listed.
ft—(Optional) Displays the list of redundancy or fault-tolerance (FT)
configurations configured for the current context. The ACE also displays
configuration information for each ft configuration listed.
interface—(Optional) Displays interface information.
parameter-map—(Optional) Displays parameter map information.
policy-map—(Optional) Displays policy map information.
probe—(Optional) Displays probe information.
resource-class—(Optional) Displays resource class information.
role—(Optional) Displays the list of roles configured for the current context.
The ACE also displays configuration information for each role on the list.
rserver—(Optional) Displays real server information.
serverfarm—(Optional) Displays serverfarm information.
sticky—(Optional) Displays sticky information.
Chapter 5 Managing the ACE Software
OL-11157-01