Cisco ACE-4710-K9 Administration Manual page 385

Chapter 9 Configuring the XML Interface
R E V I E W D R A F T - C I S C O C O N F I D E N T I A L
The syntax of this command is:
The keywords, arguments, and options are:
•
•
For example, to specify an interface VLAN and apply an XML HTTPS
management policy to the VLAN, enter:
host1/Admin(config)# interface vlan 50
host1/Admin(config-if)# ip address 192.168.10.1 255.255.0.0
host1/Admin(config-if)# service-policy input MGMT_XML-HTTPS_POLICY
For example, to globally apply an XML HTTPS management policy to all of the
VLANs associated with a context, enter:
host1/Admin(config)# service-policy input MGMT_XML-HTTPS_POLICY
To detach the XML HTTPS management policy from an interface, enter:
host1/Admin(config-if)# service-policy input MGMT_XML-HTTPS_POLICY
To detach the XML HTTPS management policy from an interface, enter:
host1/Admin(config-if)# no service-policy input MGMT_XML-HTTPS_POLICY
To globally detach the XML HTTPS management policy from all VLANs
associated with a context, enter:
host1/Admin(config)# no service-policy input MGMT_XML-HTTPS_POLICY
OL-11157-01
service-policy input policy_name
input—Specifies that the traffic policy is to be attached to the input direction
of an interface. The traffic policy evaluates all traffic received by that
interface.
policy_name—Name of a previously defined policy map, configured with a
previously created policy-map command. The name can be a maximum of 40
alphanumeric characters.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring HTTP and HTTPS Management Traffic Services
9-21