Showing Ssh Session Information Showing Ssh Key Details - Cisco ACE-4710-K9 Administration Manual

Viewing Session Information
Showing SSH Session Information
Showing SSH Session Information
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-26
This section contains the following procedures:
Showing SSH Session Information
•
Showing SSH Key Details
•
To display information related to the SSH session, use the show ssh session-info
command in Exec mode. Only context administrators can view SSH session
information associated with a particular context.
The syntax of this command is:
show ssh session-info [context_name]
The optional context_name argument specifies the name of the context for which
you want to view specific SSH session information. The context_name argument
is case sensitive.
For example, enter:
host1/Admin# show ssh session-info
Table 2-3 describes the fields in the show ssh session-info command output.
Table 2-3 Field Descriptions for the show ssh session-info Command
Field
SessionID
Remote Host
Active Time
To display the maximum number of enabled SSH sessions, use the show ssh
maxsessions command in Exec mode. Only context administrators can view SSH
session information associated with a particular context.
Chapter 2
Description
Unique session identifier for the SSH session.
IP address and port of the remote SSH client.
Time since the SSH connection request was received
by the ACE.
Enabling Remote Access to the ACE
OL-11157-01