Cisco ACE-4710-K9 Administration Manual page 162

Configuring a Layer 3 and Layer 4 Policy Map
Table 4-9 Layer 3 and Layer 4 Policy Map Actions and Related Documentation
Layer 3 and Layer 4
Policy Map/Actions
Server load balancing Cisco 4700 Series Application
Application
acceleration and
optimization
Secure Sockets Layer
(SSL) security
services
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-48
For example, to create a Layer 3 and Layer 4 traffic management policy map that
permits ICMP and SSH connections to be received by the ACE, enter:
host1/Admin(config)# policy-map type management first-match
L4_MGMT_POLICY
host1/Admin(config-pmap-mgmt)# class ICMP_CLASS
host1/Admin(config-pmap-mgmt-c)# permit
host1/Admin(config-pmap-mgmt-c)# exit
host1/Admin(config-pmap-mgmt)# class SSH_CLASS
host1/Admin(config-pmap-mgmt-c)# permit
host1/Admin(config-pmap-mgmt-c)# exit
To specify the different policy map actions that you want applied to the Layer 3
and Layer 4 network traffic that passes through the ACE, see the appropriate ACE
document and chapter as outlined in
actions for the different Layer 3 and Layer 4 network traffic policies based on the
function of the Layer 3 and Layer 4 policy map.
For example, to specify server load-balancing actions for the Layer 3 and Layer 4
policy map, enter:
host1/Admin(config-pmap)# class L4_SLB_CLASS
host1/Admin(config-pmap-c)# loadbalance vip inservice
host1/Admin(config-pmap-c)# loadbalance policy L7SLBPOLICY
host1/Admin(config-pmap-c)# exit
Document
Control Engine Appliance
Server Load-Balancing
Configuration Guide
Cisco 4700 Series Application
Control Engine Appliance
Application Acceleration and
Optimization Configuration
Guide
Cisco 4700 Series Application
Control Engine Appliance SSL
Configuration Guide
Chapter 4 Configuring Class Maps and Policy Maps
Table 4-9. Table 4-9 defines the associated
Chapter
Chapter 3, Configuring Traffic Policies for
Server Load Balancing
Chapter 4, Configuring a Traffic Policy for
HTTP Optimization
Chapter 3, Configuring SSL Termination
and Chapter 4, Configuring SSL Initiation
OL-11157-01