Remote Network Management Tools - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Note
Using a Text
Editor to Edit
Server's Files
CAUTION!
SNMP
HP Web
JetAdmin
-
7 10 Setup Reference for All Networks
Some settings that affect access rights for a particular network
type are not found under Discs and Drives. They appear in
Quick Setup configuration.
Use a text editor to open the config.ini file in the
ServerProperties folder in the System folder on the server.
Edit the parameters and values.
Make sure there is a space between the equal sign and the
parameter value. All other spaces between names of parameters
or values are ignored. Do not remove the [END] marker from
the file.
You must save the file and restart the server to activate the new
settings. You can do this by setting the Restart parameter in the
config.ini file to yes and saving the file. Instead of setting
Restart in the file, you can save the file first and then switch the
server's power off, wait 10 seconds, and switch power on.
The new settings are ready for use when the server completes
its restart. See page 2-5.

Remote Network Management Tools

The server includes SNMP broadcast support. Using remote
network management tools, you can autodiscover the
HP CD/DVD-ROM servers on your network. You can use
HP Web JetAdmin to see all installed HP CD/DVD-ROM servers
and print servers. This can help you, for example, to check of the
health of the networked peripherals or to assign IP addresses.
HP Web JetAdmin is available from Hewlett-Packard for
downloading from URL: www.hp.com/go/webjetadmin