How To Use Hp Surestore Cd-Rom Drive - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Example Drive
Loading and
Operation
Note
!
-
2 6 Installing Your Server Tower

How to Use HP SureStore CD-ROM Drive

•
Tray door: Press Stop/Eject button to open door. Insert CD into
drawer. Press Stop/Eject button to close door.
•
Stop/Eject button: Push to eject CD. This will not work if the
power is off or if ejection has been disabled by configuration.
If you have eliminated these possibilities and still have
difficulty ejecting a disc, see "Emergency Eject" below.
•
Emergency Eject button (recessed): If the automatic Stop/Eject
button does not work although power is on and ejection is
enabled in the configuration, you may have to use this method
of disc ejection as an last resort. Switch off power. Insert a
paper clip or other thin rigid object in this hole to press the
recessed button to eject the CD.
•
ON/BUSY indicator: On (yellow) when power is switched on.
Blinking continuously when CD is inserted and being
accessed. Off when CD is inserted and not being accessed.
•
DISC indicator: On (green) when power is on and CD is
inserted. Off if no CD is inserted.
1. While the drive is powered up, push the Stop/Eject button.
The tray drawer will slide out in 2-3 seconds.
2. Lay the bare CD into the depression in the tray, label side up.
For rack-mounted servers, the label side faces the server module;
secure the CD in place by sliding the three clips over it.
3. Press the Stop/Eject button again, and the tray will slide shut
within 2-3 seconds.
We recommend you use the Stop/Eject button to close the tray
in a smooth and secure manner. Closing the tray by pressing
the front of the drawer by hand is not recommended.
Tray door
ON/BUSY indicator
DISC indicator
Emergency Eject button
Stop/Eject button