HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 112

-
10 20 Troubleshooting
Replacing the Tower Component
1. Before returning a faulty tower to HP, remove and retain all
HP drive modules and the server module, as described in the
previous three procedures.
2. Remove and save the LAN Address label, or copy and retain the
information recorded on it.
3. Return the tower in the product package. Use the warranty
procedure described in appendix B, "Warranty".
4. When you receive the replacement tower, record the old label
information on it (see step 2 above), or locate the LAN hardware
address on a label on the bottom of the server module. The LAN
hardware address is determined by the existing server module.
5. Reinstall the replacement tower by reinstalling the server module
and the drives (reversing previous steps).
6. Replace the front cover by first hooking the flange of the cover into
the bottom of the tower case. Close the cover by pushing it towards
the main body of the tower. Lock the cover using the key. Refer
to the installation instructions in chapter 2 to reinstall the server
on the network.