Communication Mode For Multipoint Connection - Sony PCS-G50 System Integration Manual

1-11-9. Communication Mode for Multipoint Connection

Up to 6 points (including the local site) can be connected and split-screen viewing is possible. Multipoint
connection of mixed IP (H.323/SIP) and ISDN environment is possible for video communication termi-
nals.
This section describes operational specifications and precautions when a multipoint connection is estab-
lished.
General Precautions
. For multipoint connection, MCU software for LAN connection (sold separately) is required.
. For multipoint connection in a mixed SIP and ISDN environment, SIP software and MCU software for
ISDN connection (sold separately) are required.
. You can specify the transmission mode used when connecting a network camera, from "TCP," "UDP
(Unicast)" and "UDP (Multicast)." Multipoint connection allows single or mixed transmission mode.
Connection Example
Main Terminal
PCS-G50/G70
PCS-G70/G70P/G50/G50P
ISDN (H.320)
Sub-terminal
IP (H.323/SIP)
IP, UDP (Unicast) transmission
SNC-RX550N/RX550P
IP, UDP (Multicast) transmission
IP, TCP transmission
SNC-CS50N/CS50P
Sub-terminal
SNC-RZ50N/RZ50P
1-69