Sony PCS-G50 System Integration Manual page 71

User Menu
When you click "User" in the Administrator menu, the
User menu appears. Configure the following settings.
Administrator: Specify "User name" and "Password"
for Administrator.
USER 1 to USER 9: Enabled when "Viewer authentica-
tion" is set to On.
You can register up to nine users
which can be used when the PCS-
G50/G70 connects the camera.
Specify "User name" and "Password"
for each user.
Audio: Enabled when "Viewer authentica-
tion" is set to On.
Select this check box when you want
to receive audio from the camera with
the video communication terminal. It
can be determined by each user
(Connection with Administrator
authority can always receive audio.)
Viewer mode: Enabled when "Viewer authentica-
tion" is set to On.
Select the viewer mode which is
enabled after the user is authenticat-
ed. It can be determined by each user.
Functions available for each viewer
mode differ.
PCS-G70/G70P/G50/G50P
m
. To enable the camera control function during connection
to the PCS-G50/G70 after the user is authenticated,
"Administrator", "Full" or "Pan/Tilt" authority is
required.
. To enable the preset function during connection to the
PCS-G50/G70 after the user is authenticated, "Adminis-
trator", "Full", "Pan/Tilt" or "Preset position" authority
is required.
Viewer authentication: Set to On when the user is authen-
ticated for connecting to the PCS-
G50/G70. Normally set to On.
When set to On, the above-
mentioned "Viewer mode" will be
enabled after the user is authenti-
cated.
When "Viewer authentication" is
set to Off, select the viewer mode
from Full, Pan/Tilt, Preset posi-
tion, Light or View from the
selector on the left. The viewer
mode selected here is enabled only
when the video communication
terminal connects the camera
without authentication. When
"Viewer authentication" is set to
Off it is recommended that
"Admission" in the network
camera list of the PCS-G50/G70
be set to Off, too.
m
. During connection to the PCS-G50/G70 without authen-
tication, video communication terminals cannot receive
audio from the network camera.
. To enable the camera control function during connection
to the PCS-G50/G70 without authentication, "Full" or
"Pan/Tilt" authority is required.
. To enable the preset function during connection to the
PCS-G50/G70 without authentication, "Full", "Pan/Tilt"
or "Preset position" authority is required.
1-67