Updating Of Software; Updating Using Memory Stick - Sony PCS-G50 System Integration Manual

2-5. Updating of Software

The software of this system may be updated for improvement in a function.
Two methods are available for updating. (Memory Stick and ftp)
When the updated is performed using the Memory Stick, the application software is updated only when it
is newer than the existing file by checking the file date. But with the ftp, care should be taken because the
file is compulsory overwritten.
n
Besides the communication terminal, software of the ISDN unit and data solution box (not supplied) is
also included in the system software.

2-5-1. Updating Using Memory Stick

n
Make sure that the power
stays on during this time.
Software may not get
updated.
2-14
Turn off the power switch of the communication
terminal.
Insert a Memory Stick storing system software into
Memory Stick slot of the communication terminal.
m
. For details of storing system software in the Memory Stick,
consult the Sony service staff.
. Use a 128-Mbyte Memory Stick.
Turn on the power switch.
. The POWER indicator (green) lights.
. The loader execution screen is displayed.
n
The update operation takes approx. 5 minutes.
The launcher menu is displayed on the TV monitor.
Push in the Memory Stick once and then take out it.
Select "Setup" and confirm "Host version" in an
information menu.
Return to the launcher menu and turn off the power
switch on the rear panel of this unit.
Turn on the power switch again and reconfirm
"Host version".
PCS-G70/G70P/G50/G50P