Web Control Function - Sony PCS-G50 System Integration Manual

1-11-10. Web Control Function

This section describes the functions related to network
camera connection of Web control functions supported by
PCS-G50/G70.
Identifying a User
When you want to dial from the network camera
list, check or modify the registered entries, and
register new entries:
Log in by entering the user name and password for admin-
*1
istrator or network camera user
Clicking [Network Camera] opens the Network Camera
screen. On this page, you can dial from the network
camera list, check or modify the registered entries, and
register new entries in the network camera list:
When you want to check or modify the registered
entries, and register new entries on the Network
Camera page of General Setup Menu:
Log in by entering the user name and password for admin-
istrator.
Clicking [Setup] -[General] opens the General Setup
screen. On this screen, you can check or modify the
registered entries, and register new entries on the Network
Camera page of General Setup Menu
You can make settings through the Web page, as well as
through the Network Camera page under the General Setup
of PCS-G50/G70. Operation based on the settings is also
the same. (For details, see "1-11-5. Setting Network
Camera Setting" section.)
*1: User name for administrator is "sonypcs" and its password is
the administrator setup password registered in Password
page (1/3) of the Administrator Setup menu.
*2: User name for network camera user is "networkcamera" and
its password is the network camera password registered in
Password page (1/3) of the Administrator Setup menu.
PCS-G70/G70P/G50/G50P
*2
.
How to Use "Network Camera"
Network Camera button
Dial button Edit button
Network Camera Button
You can find this button only when you log in the Web
page with administrator authority or network camera user
authority. And this button is activated only when "Network
Camera Connection" in the Network Camera page under
the General Setup is set to On.
Dial Buttons (1 to 20)
Clicking this button enables you to dial the network camera
which is registered in the corresponding network camera list.
m
. When "Admission" is set to On, and "Password" is left
blank in the camera network list, enter the password in
the password entry box and then click the Dial button.
. To disconnect, click the Dial/Disconnect button on the
top part of the page.
Edit Buttons (1 to 20)
Clicking this button opens the edit screen shown below.
You can register a new entry for the corresponding net-
work camera list. You can also change and modify the
registered entries.
Password Entry Box
You can check whether a password is saved or not. The
password is represented with asterisks (*) if saved.
Password entry box
1-79