Sony PCS-G50 System Integration Manual page 24

(PCS-G70/G70P)
Menu Page Item 1
Audio Setup 2/2 Beep Sound
Sound Effect
Dial Tone
Ringer Tone
Video Setup 1/1 Video Input
Custom Input 1/1
Label
Monitor Out
General Setup 1/1 Device Setup 1/2
1-20
Page Item 2 Description
Select "On" to generate beep sound from pressing the
remote commander button. Select "Off" not to generate.
Select "On" to generate effect sound at system start up and
conference start/end. Select "Off" not to generate.
Select "On" to generate ring-back tone or busy tone during
dialing. Select "Off" not to generate.
Select "On" to generate ringer tone with an incoming call.
Select "Off" not to generate
1/1 Dual Video Select "On" when distributing 2-channel moving picture
simultaneously from the beginning of conference. Select
"Off" when not distributing it.
n
This function is not available in the system version 1.00 to 1.02.
Split Select "Vertical or "Horizontal" when splitting the screen into
two. Select "Off" when not splitting it.
MAIN Select video picture of video input 1.
SUB Select video picture of video input 2.
Main Camera Enter the name when "Main Camera" is selected on the
video input selection window.
IR1 Enter the name when "IR1" is selected on the video input
selection window.
AUX1 Enter the name when "AUX1" is selected on the video input
selection window.
Sub Camera Enter the name when "Sub Camera" is selected on the video
input selection window.
IR2 Enter the name when "IR2" is selected on the video input
selection window.
AUX2 Enter the name when "AUX2" is selected on the video input
selection window.
1/1 Monitors Select the number of monitors connected to the
communication terminal.
Connection Select connectors connecting to the monitors. You can
select them up to the number specified in "Monitors".
Monitor Select "Main" or "Sub" for connected monitors to be used as.
Only one "Main" monitor can be selected. When 1 or 3
monitors are used, VIDEO1 is always "Main" monitor.
Terminal Name Enter terminal name to be notified to MCU.
Standby Select "On" when using standby mode. Select "Off" when
Mode not using it.
Standby Set the time (1 to 99 minutes) required until the unit is put
Time into standby mode when standby mode is set to "On".
Last Number Select "On" when registering the remote user in Phone Book
Registration after a conference ends. Select "Off" when not registering it.
Control by Select "On" when receiving camera control command from
Far End the remote party. Select "Off" when not receiving it.
Default
On
On
On
On
Off
Off
CAMERA
CAMERA
Blank
Blank
Blank
Blank
Blank
Blank
1
VIDEO1
Main
PCS-G70
Off
Blank
On
On
(Continued)
PCS-G70/G70P/G50/G50P