Sony PCS-G50 System Integration Manual page 74

Operational Specifications 1: When only network cameras are connected as sub-
Condition
1-a When sub-terminals are
connected within the
range of the LAN
bandwidth of the main
PCS
1-b When sub-terminals
exceed the range of the
LAN bandwidth of the
main PCS
*1: The PCS automatically switches communication modes not supported by the PCS (JPEG, dual codec, VGA, G.726,30fps on H.264
and TCP) to a supported one.
1-70
terminals
Operational Specifications
Determined Communication Mode
Authority
Administrator When each setting on the main PCS's
Authority networkcamera page is set to a setting other
than "Auto":
Connection is made using the setting values of
the main PCS. The operation mode and image
size are always determined by the PCS setting
values. (They cannot be changed automatically.)
When each setting on the main PCS's
network camera page is set to "Auto":
In principle, operations follow each network
camera's setting values.
User Regardless of the main PCS's network
Authority camera settings, operations follow each
network camera's setting values.
Mixed Cameras connected with the administrator
Administrator authority and cameras connected with the user
and User authority operate independently of each other,
Authority with the specifications described above.
Administrator When the bit rate exceeds the PCS's LAN
Authority bandwidth, it is automatically changed to the
optimum rate regardless of the main PCS's
network camera settings.
User When the bit rate exceeds the PCS's LAN
Authority bandwidth, the mode is changed to "Voice Only"
from the added camera regardless of the main
PCS's network camera settings.
Mixed When the bit rate exceeds the PCS's LAN
Administrator bandwidth, it is automatically changed to the
and User optimum rate for cameras connected with the
Authority administrator authority, while the mode is
changed to "Voice Only" for cameras connected
with the user authority if capability exchange is
required again, regardless of the main PCS's
network camera settings.
Connection
See
example
1-a-1 (1)
See
example
1-a-1 (2)
*1
See
example
1-a-2
See
example
1-b-1
See
example
1-b-2
See
example
1-b-3
PCS-G70/G70P/G50/G50P