Connecting Four Camera Units (Pcs-G70/G70P) - Sony PCS-G50 System Integration Manual

1-8. Connecting Four Camera Units (PCS-G70/G70P)

Up to four camera units can be connected to PCS-PG70/PG70P as illustrated below.
m
. The figure below shows connections of camera units only.
. Be sure to turn off all the equipment before making any connections.
. Do not connect/disconnect the camera cable with the power on. Doing so may damage the camera unit
or communication terminal.
EVI-D100/D100P
(Main 2nd camera)
BACKUP IRSELECT
OFF ON
DC IN
VIDEO S VIDEO IN VISCA OUT 12V
VISCA cable
(not supplied)
S-video connecting cable (not supplied)
n
Besides EVI-D100/D100P (not supplied), BRC-300/300P (not supplied) can also be used.
PCS-G70/G70P/G50/G50P
PCSA-CG70/CG70P
(Main 1st camera)
TERMINAL VISCA OUT
VISCA conversion
cable (supplied with
camera unit)
Camera cable
(supplied with
camera unit)
MCU VIDEO OUT AUDIO OUT AUDIO IN MAIN
(MIXED) AUX LINE MIC CAMERA AUX IN
(PLUG IN POWER)
1 2
1 2 3 4 5
WHITE 100BASE-TX/
DC 19.5V IR OUT 1 2
EC-MIC RGB OUT BOARD 10BASE-T
AUX CONTROL
1 2 CTRL-S 1 2
AUX MONITOR
VIDEO OUT
PCS-PG70/PG70P
PCSA-CG70/CG70P
(Sub 1st camera)
TERMINAL VISCA OUT
VISCA conversion
cable (supplied with
camera unit)
Camera cable
(supplied with
camera unit)
S-video connecting cable (not supplied)
SUB
CAMERA AUX IN
DSB
ISDN UNIT
EVI-D100/D100P
(Sub 2nd camera)
BACKUP IRSELECT
OFF ON
DC IN
VIDEO S VIDEO IN VISCA OUT 12V
VISCA cable
(not supplied)
1-47