Sony PCS-G50 System Integration Manual page 59

Video communication system
Hide thumbs Also See for PCS-G50:
Table of Contents

Advertisement

Other Precautions
You cannot perform the following PCS-G50/G70 functions when connected to a network camera (even
between videoconferencing terminals):
. Sending/receiving a presentation image
. Sending dual video
. Sending a still image
. Encrypted conference
. Cascade connection
For the reasons outlined below, do not connect to network cameras used for monitoring. It is recommend-
ed that network cameras be installed exclusively for videoconferencing.
. The PCS-G50/G70 does not support JPEG. JPEG recording may stop when the PCS-G50/G70 is
connected to a monitoring system where Sony Recorder Software (RealShot Manager, IMZ series),
Sony Network Recorder (NSR series), etc. is used.
. Connecting a video communication terminal to a network camera used for fixed monitoring and far-end
controlling may result in a loss of monitoring information.
When the SNC-RX550N/RX550P is installed on a desktop, the video image will be displayed upside
down. The PCS-G50/G70 has no vertical flip function.
Basic Specifications
Target Network Camera
(As of December 2007)
Transmission Mode
*1
Image Size
*2
Mode
Audio Codec
Bit Rate
*3
Frame Rate
Type of Connection
*1: 640 x 480 (VGA) is not supported.
*2: H.264, MPEG4 and JPEG dual codec and JPEG single codec are not supported.
*3: Up to 15fps (NTSC) or 12fps (PAL) if the mode is H.264 and the transmission mode is TCP.
*4: Multipoint connection requires optional MCU software for LAN connection.
Multipoint connection for mixed SIP and ISDN environment requires optional SIP software and MCU software for ISDN connection.
Cascade connection is not supported.
PCS-G70/G70P/G50/G50P
Sony SNC-RX550N/ RX550P (software version 2.1)
Sony SNC-RZ50N/ RZ50P (software version 2.1)
Sony SNC-CS50N/ CS50P (software version 2.1)
For the latest information on supported cameras and software versions, contact your
Sony sales representative.
UDP (Unicast), UDP (Multicast), TCP
* UDP (Unicast) is recommended
320 x 240 (QVGA), 160 x 120 (QQVGA)
H.264, MPEG4 (single codec only)
G.711
When using H.264:
32, 64, 128, 256, 384, 512, 768, 1024, 1536 kbps
When using MPEG4: 64, 128, 256, 384, 512, 768, 1024, 1536, 2048 kbps
NTSC: 15fps, 30fps
PAL:
12fps, 25fps
Peer-to-peer, multipoint connection
Up to 6 points (including the local site) can be connected for multipoint connection with
the following configurations:
. H.323 + network camera
. H.320 + network camera
. SIP + network camera
. MIX MCU (mixture of the above patterns)
*4
1-55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-g70Pcs-g70pPcs-g50p

Table of Contents