Machine Information; Peripheral Status; Communication Mode Status - Sony Ipela PCS-XC1 Operating Instructions Manual

Machine Information

The Machine Information menu shows the
versions of the unit and the connected
equipment for exclusive use, installed
software versions, etc.
Host Version
Displays the software version of the unit.
Software Option
Displays the optional software installed.
Option I/F
Displays the optional connected equipment.
None: No optional equipment is connected.
Host Name
Displays the host name.
IP Address
Displays the IP address for LAN.
MAC Address
Displays the MAC address for LAN.
Serial Number
Displays the serial number.

Peripheral Status

Video Input
Displays the input video name.
Audio Input (MIC)
Displays microphone input name.
Video Output
Displays the 50 Hz/60 Hz setting of
"Frequency".
Audio Output
Displays the audio output equipped with this
system.
LAN Mode (LAN)
Displays the LAN Mode for LAN.
Gatekeeper
Displays the status of registration to
gatekeeper with the following messages:
66
Displaying the Machine Status
Gatekeeper Requested, Gatekeeper
Confirmed, Gatekeeper Reject, Registration
Requested, Registration Confirmed,
Registration Failed, Registration Rejected,
Registration Timeout, Unregistration
Requested and Unregistration Confirmed.

Communication Mode Status

The Communication Mode Status menu
shows the status of current communication
when communication is in progress, and the
status of previous communications when
communication is not in progress.
The LAN Line Status or LAN Connection
Status will also be displayed depending on
the line interface used.
Communication Mode Status
The current communication status will be
displayed. When two or more points are
connected to the system, selecting "Next" in
the lower part of the page displays the next
page.
For the items described with both "(Encode)"
and "(Decode)", the descriptions under
"(Encode)" show the setting status of the local
system and those under "(Decode)" show the
status of the receiving.
Far End Terminal Name
Displays the terminal name of a remote
party.
Remote Address
Displays the address of a remote party.
Audio Mode
Displays the current audio encoding format.
Video Mode
Displays the current video encoding format.
"H.264 HP" appears during H.264 High
Profile communication, and "H.264"
appears during H.264 Baseline Profile
communication.
Note
The audio encoding and video encoding
formats used for communication with a remote
party may differ from the settings in this menu,