Registering/Editing Network Camera List - Sony PCS-G50 System Integration Manual

1-11-6. Registering/Editing Network Camera
List
To connect to network cameras, be sure to register your
desired cameras in the network camera list in advance.
Also you can save/load/delete the network camera list data
collectively. Proceed as follows.
m
. You can register up to 20 network cameras in the
network camera list.
. The network camera list is separate from 500 items in
the ordinary phone book.
. Private and shared phone books are not supported.
. You can make a still image (JPEG) display in the
network camera list.
Registering/Editing
1. Select "Phone Book" in the launcher menu using
, , and buttons on the remote commander and
press the PUSH ENTER button. The Phone book
appears.
2. Click the network camera icon using , , , and
buttons on the remote commander and press the PUSH
ENTER button. The network camera list appears.
m
. To make the network camera icon appear in the
phone book, be sure to set "Network Camera
Connection" to On under "Network Camera" in
General Setup menu.
. If you have set the network camera password, you
are asked to enter it every time accessing the
network camera list. (For details on the network
camera password, see section 1-11-4.)
Phone Book
Jane Mary
3. Select the list to register to or edit using , , , and
buttons on the remote commander and press the
PUSH ENTER button. The submenu appears.
1-62
,
0-9
A-1
J-S
Network
T-Z
camera icon
Recent
New Entry
Cancel
4. Select "Edit" using and
commander and press the PUSH ENTER button. The
network camera edit screen appears.
Network Camera List
Dial
Network Index XXXX User ID
Camera
1
IP: Edit XX.XX.XX.XX Password
Delete
Index XXXX User ID
Network
Camera
Cancel
2
IP: XX.XX.XX.XX Password
Index User ID
EMPTY
3
IP: Password
Index User ID
EMPTY
4
IP: Password
5. Enter "Name," "IP Address," "User Name," and
"HTTP port number," "Admission" and "Transmis-
sion." And enter "Password" if necessary. (For details
on each item, see "To Be Registered in Network
Camera List" on the next page.)
Edit Network Camera List
Name
Network
Camera
IP Address
User mame
Passward
Admission
On
80
HTTP port number
Transmission
TCP
Save
m
. Normally set "Admission" to On. If set to Off,
registered user name and password will be deleted.
. Enter the same user name and password for "User
Name" and "Password" respectively as those
registered on a network camera in advance. Note
that sequential operation differs depending on a type
of user authority. For details, see "1-11-2. User
Authority".
. For details on User menu and Camera menu on a
network camera, see "1-11-5. Setting Network
Camera Setting" section.
6. Select "Save" using
commander and press PUSH ENTER button.
buttons on the remote
Cancel
. . .
Cancel
and buttons on the remote
PCS-G70/G70P/G50/G50P