Initialization; Inserting Batteries Into The Remote Commander - Sony PCS-G50 System Integration Manual

1-4. Initialization

1-4-1. Inserting Batteries into the Remote
Commander
Most of the operations with the video communication
system can be controlled with the supplied remote com-
mander.
n
Be sure to insert the batteries _ side first. Inserting them
forcibly + side first may damage the insulated film
covering the batteries and cause a short circuit.
m
Battery life
When the remote commander does not function properly,
replace both the batteries with new ones.
Notes on batteries
To avoid damage from possible battery leakage or corro-
sion, observe the following:
. Make sure to insert the batteries with the polarities in the
correct direction.
. Do not mix old and new batteries, or different types of
batteries.
. Do not attempt to charge the batteries.
. If the remote commander is not used for a long period of
time, remove the batteries from it.
. If battery leakage occurs, clean the battery compartment
and replace all the batteries with new ones.
PCS-G70/G70P/G50/G50P
PCSA-RG1
1. Remove the battery compartment cover.
2. Insert two size AA (R6) batteries (supplied) with
correct polarities into the battery compartment.
3. Attach the cover.
PCS-RG70
1. Remove the battery compartment cover.
2. Insert two size AAA (R03) batteries (supplied) with
correct polarities into the battery compartment.
3. Attach the cover.
1-9