Sony PCS-G50 System Integration Manual page 81

Example
2-b-1
Main
Terminal
Added Sub-terminal 1
2048 kbps/15 fps
When a communication terminal is connected as a
sub-terminal and if the sum of the bit rates of the
sub-terminals (2048 kbps for communication terminal +
2048 kbps for camera) exceeds the main PCS's LAN
bandwidth (4 Mbps)
changed to the optimum value regardless of the main
PCS's network camera settings.
2-b-2
Main
Terminal
Added Sub-terminal 1
2048 kbps/15 fps
When a communication terminal is connected as a
sub-terminal and if the sum of the bit rates of the
sub-terminals (2048 kbps for communication terminal +
2048 kbps for camera) exceeds the main PCS's LAN
bandwidth (4 Mbps)
to "Voice Only" because user authority access is allowed
and capability exchange cannot be performed again.
*3: If the network camera bit rate is configured as 2048 kbps for camera 2, the sum of the bit rates of the sub-terminals (communication
terminal and camera) exceeds 4 Mbps of the PCS's LAN Bandwidth because the network camera bit rate does not include audio
(G.711 = 64 kbps).
PCS-G70/G70P/G50/G50P
Description
Camera 2
2048 kbps/15 fps
* * * * * 3
, the bit rate is automatically
Camera 2
2048 kbps/15 fps
* * * * * 3
, the mode for camera 2 is changed
Setting Example/
Determined Communication Mode
Settings on Main Terminal (PCS)
Communication Setup:
LAN Bandwidth: 4 Mbps
General Setup/Network Camera:
Bit Rate: Auto
Frame Rate: Auto
Mode: Auto
Image Size: Auto
Determined Com. Mode on Sub-terminal
Terminal 1 The bit rate is changed to
the optimum value when
connection is made.
Camera 2
Settings on Main Terminal (PCS)
Communication Setup:
LAN Bandwidth: 4Mbps
General Setup/Network Camera:
(Disabled even if configured)
Determined Com. Mode on Sub-terminal
Terminal 1 LAN Bandwidth: 2048 kbps
Video Frame: 15 fps
(No change for any item)
Camera 2 Changes to "Voice Only"
mode
1-77