Sony PCS-G50 System Integration Manual page 70

Video codec Tab
Mode: Select the operation mode, "H.264" or
"MPEG4" under Single codec.
n
"JPEG" under Single codec and "Dual
codec" are unavailable for connection with
PCS-G50/G70.
Image Size: Select the image size "QVGA" or
"QQVGA".
n
"VGA" is unavailable for connection with
PCS-G50/G70.
Frame rate, Bit rate:
Configure the appropriate values according
to use environment.
m
. Connection cannot be made at 15fps or
more (NTSC) and at 12fps or more
(PAL) if the mode H.264 and transmis-
sion mode TCP are selected.
. When a multipoint connection is estab-
lished, configure the frame rate so that it
does not exceed the main PCS-G50/
G70's frame rate limit.
For details, see "1-11-9. Connection
Mode for Multipoint Connection"
section.
1-66
Streaming Tab
Unicast streaming: When UDP (Unicast) transmission is
selected, set video and audio port
numbers so that they do not overlap
with the main PCS-G50/G70's, and
also do not overlap with other
network cameras' which are connect-
ed with the main PCS-G50/G70.
Multicast streaming: When UDP (Multicast) transmission
is selected, set "Multicast streaming"
to On and set "Multicast address",
"Video port number" and "Audio
port number" properly.
PCS-G70/G70P/G50/G50P