Sony PCS-G50 System Integration Manual page 26

(PCS-G70/G70P)
Menu Page Item 1
General Setup 1/1 Whiteboard
1/1 Network
Camera
1-22
Page Item 2 Description
1/1 Whiteboard Select whether to attach Whiteboard "mimio-Xi" vertically or
Attachment horizontally.
Select the size (height x width) of Whiteboard used.
Whiteboard
Size
Whiteboard Select whether to show the Whiteboard size in inches or
Size meters.
Measurement
1/1 Network Allows you to select whether to connect to network cameras.
Camera On: Connect to network cameras.
Connection Off: Do not connect to network cameras.
Bit Rate Allows you to select the bit rate for video sent from network
cameras. This bit rate does not include the audio transfer rate.
Auto: Give priority to the setting on the network camera.
32 to 2048 kbps: Connect to network cameras at the
m
. When connecting network cameras at H.264, the bit rates
from 32 kbps to 1536kbps are selectable. If the rate
2048 kbps is selected, it will be changed to 1536 kbps
automatically.
. When connecting network cameras at MPEG4, the bit
rates from 64 kbps to 2048 kbps are selectable. If you set
the rate to 32 kbps, it will be changed to 64 kbps
automatically.
Frame Rate Allows you to select the frame rate for video sent from
network cameras.
Auto: Give priority to the setting on the network camera.
30fps: (In case of connecting to NTSC cameras)
Send pictures at a maximum rate of 30 frames per
second.
(In case of connecting to PAL cameras)
Send pictures at a maximum rate of 25 frames per
second.
n
Even if 30fps is selected, the rate is automatically set
to 15fps (NTSC) or 12fps (PAL) if the mode is H.264
and the transmission mode is TCP
15fps: (In case of connecting to NTSC cameras)
Send pictures at a maximum rate of 15 frames per
second.
(In case of connecting to PAL cameras)
Send pictures at a maximum rate of 12 frames per
second.
Mode Allows you to select the compression format for video sent
from network cameras.
Auto: Give priority to the setting on the network camera.
m
. If the setting on the network camera is JPEG
. If the setting on the network camera is dual codec,
H.264: Send video based on the H.264 standard.
MPEG4: Send video based on the MPEG4 standard.
specified bit rate.
single codec, connection is made by automatically
changing it to H.264 single codec.
connection is made by automatically changing it
to H.264 single codec.
Default
Vertical
3'0" x 4'0"
Inches
On
Auto
Auto
Auto
(Continued)
PCS-G70/G70P/G50/G50P