Setting Network Camera Itself - Sony PCS-G50 System Integration Manual

1-11-8. Setting Network Camera itself

This section explains the setting options which can be set
with the network camera's menu.
Camera Menu: Used to set the camera image and audio.
Connecting the network camera with
Administrator authority
When each of "Bit Rate", "Frame Rate",
"Mode" or "Image Size" is set to "Auto"
on PCS-G50/G70, the Camera Menu
setting is prioritized. Value not supported
by PCS-G50/G70 is automatically changed
to supported one if configured on the
Camera menu. So you can configure an
arbitrary value for each item. When each of
"Bit Rate", "Frame Rate", "Mode" or
"Image Size" is set to other than "Auto" on
PCS-G50/G70, the settings of the Camera
Menu are disabled if configured.
Connecting the network camera with
User authority
Connection is made using the setting values
of the Camera Menu. So be sure to config-
ure the related parameters properly with the
Camera Menu.
User Menu: Used to set the user name and password.
Configure this setting first before connec-
tion.
System Menu: Used to set the name used as a terminal
name indication. With this menu, you can
also confirm the network camera's serial
number and software version.
PCS-G70/G70P/G50/G50P
Camera Menu
Click "Camera" under Administrator menu, Camera menu
appears.
This section describes settings required when you connect
cameras with User authority.
Common Tab
Microphone: Select On for the video communication
terminal to receive audio from the network
camera.
n
The following setting is also required with
the User Menu if you connect the camera
with User authority. For details, see "User
Menu" section mentioned below.
. Set "Viewer authentication" to On and
check the "Audio" check box for the user
with your desired authority.
Audio codec: Set to "G.711" to exchange audio.
Audio upload: Set to "Enable" for the network camera to
receive audio from the video communica-
tion terminal.
1-65