Sony PCS-G50 System Integration Manual page 80

Example
2-a-2
Main
Terminal
Added Sub-terminal 1
384 kbps/15 fps
When a communication terminal is connected as a sub-
terminal and if the sum of the bit rates of the sub-terminals
(384 kbps for communication terminal + 512 kbps for
camera) does not exceed the main PCS's LAN
bandwidth (1024 kbps), the current PCS rule is applied
and the main PCS automatically tries to adjust the bit rate
of camera 2 to that of sub-terminal 1.
In this example, however, the mode for camera 2 is changed
to "Voice Only" because user authority access is allowed
and capability exchange cannot be performed again.
2-a-3
Main
Terminal
Added Sub-terminal 1
512 kbps/15 fps
* In this example, the main terminal connects to camera 2
with the administrator authority and camera 3 with the
user authority.
When a communication terminal is connected as a sub-
terminal and if the sum of the bit rates of the sub-terminals
(512 kbps for communication terminal + (1024 kbps +
512 kbps) for cameras) does not exceed the main PCS's
LAN bandwidth (4 Mbps), the current PCS
rule is applied to the bit rate regardless of the main PCS's
network camera settings.
In this example, the main PCS automatically tries to adjust
the bit rates of cameras 2 and 3 to that of sub-terminal 1,
but the mode for camera 3 is changed to "Voice Only"
because user authority access is allowed and capability
exchange cannot be performed again.
1-76
Description
Camera 2
512 kbps/15 fps
Camera 2 Camera 3
1024 kbps/ 512 kbps/
15 fps 15 fps
H.264/QVGA
Setting Example/
Determined Communication Mode
Settings on Main Terminal (PCS)
Communication Setup:
LAN Bandwidth: 1024 Mbps
General Setup/Network Camera:
(Disabled even if configured)
Determined Com. Mode on Sub-terminal
Terminal 1 LAN Bandwidth: 512 kbps
Video Frame: 15 fps
(No change for any item)
Camera 2 Changes to "Voice Only"
mode
Settings on Main Terminal (PCS)
Communication Setup:
LAN Bandwidth: 4 Mbps
General Setup/Network Camera:
Bit Rate: Auto
Frame Rate: Auto
Mode: Auto
Image Size: Auto
Determined Com. Mode on Sub-terminal
Terminal 1 LAN Bandwidth: 512 kbps
Video Frame: 15 fps
(No change for any item)
Camera 2 Bit Rate:
Changes from 1024 kbps
to 512 kbps
Frame Rate:
15 fps (No change)
Mode:
H.264 (No change)
Image Size:
QVGA (No change)
Camera 3 Changes to "Voice Only"
mode
PCS-G70/G70P/G50/G50P