Setting Of Communication Terminal And Hub - Sony PCS-G50 System Integration Manual

3-2. Setting of Communication Terminal and HUB

The LAN Mode setting of the communication terminal is "Auto Negotiation" as default setting.
When LAN Mode setting has been set to "Auto Negotiation", 10M/100M can be selected automatically,
however, Half/Full cannot be selected automatically. Therefore, if the HUB is set to Full mode, a connec-
tion failure or packet loss occurs. The following table shows an example of connection between the PCS-
PG70/PG70P/PG50/PG50P and Catalyst 2950. When the HUB is set to 100FULL or 10FULL, change the
setting of HUB or adjust the PCS-PG70/PG70P/PG50/PG50P setting to HUB. Refer to Operating
Instructions.
Table of connection between PCS-PG70/PG70P/PG50/PG50P and Catalyst 2950
PCS-PG70/PG70P/PG50/PG50P setting
2950 setting
AUTO
100FULL
100HALF
10FULL
10HALF
PCS-G70/G70P/G50/G50P
Auto 100Mbps
Negotiation Full Duplex
OK Packet loss
Packet loss OK
OK Packet loss
Packet loss Connection
failure
OK Connection
failure
100Mbps 10Mbps
Half Duplex Full Duplex
OK Packet loss
Packet loss Connection
failure
OK Connection
failure
Connection OK
failure
Connection Packet loss
failure
10Mbps
Half Duplex
OK
Connection
failure
Connection
failure
Packet loss
OK
3-3