Setting Up the Network Configurations
This section describes how to set up the network configurations for use with
various networks.
For details on the LAN Setup menu, see "LAN Setup Menu" (page 53).
For details on configurations, consult with the system administrator.
LAN (Connecting via DHCP)
Configuration example
LAN1
Set the "DHCP Mode" to "Auto" under Page 1/11 of the LAN Setup menu.
LAN Setup
Page: 1/11
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
The setting has been configured properly if the IP address appears in the
launcher menu.
To conduct a videoconference
Select "IP" under "Line I/F", enter the remote party's IP address, and dial.
74
Setting Up the Network Configurations
ON LINE
POWER
LAN ALERT
DHCP Server 1
Auto
Auto
Auto
Auto
Auto
Auto
Save
LAN2
ON LINE
POWER
LAN ALERT
Cancel