Xerox DocuPrint 100 Operator's Manual page 39

Language icon
Printer icon
Fault List icon
Tools icon
Guarded Tools
icon
Clear button
Stop button
Continue button
Sample button
Brightness control
thumbwheel
Icons
Messages area
Operator Guide
Selects the language for messages displayed on your printer
control console.
Displays the printer mimic diagram. (This is the default display
on the printer control console.)
Displays the Fault List screen.
Displays information on calling for service. Also enables you to
adjust certain features of the printer control console (for
example, alarm loudness).
Accesses certain diagnostics and service tasks. This icon is
reserved for the service representative.
Clears fault messages from the screen.
(Red) Stops printing.
(Green) Resumes printing.
Prints a sample page (an extra copy of one page from the job
that is printing currently) and sends it to the sample tray.
Adjusts the brightness of the printer control console screen.
Area where the following icons appear:
• Fault icon: Appears when a fault exists in the system that
stops the printer or prevents it from printing. If you click this
button, the Clear button displays on the screen.
• Hint icon: Appears when a masked fault or condition exists
in the printer.
Two types of messages are displayed here: fault messages,
which relate to printer malfunctions, and information messages,
which relate to printer conditions such as low dry ink.
The message area is organized as follows:
• Lines 1 and 2. Display the current status of the printer; for
example, READY.
Overview
1-19