Operator Guide
•
Every time you pick up a cartridge, ensure that the leader
block is latched.
•
Never carry two or more cartridges loose in a container.
Leader blocks can snag on other cartridges and unlatch.
•
Keep cartridges clean and dry.
•
Never release a leader block and pull tape from a cartridge.
•
Never open a cartridge.
•
Never expose tape or a cartridge to direct sunlight.
•
Never smoke near the tape drive or cartridge storage areas.
Tobacco smoke and ash are damaging to tapes.
•
Never place cartridges near electric motors or any other
magnetic sources that may erase data.
•
To clean a cartridge, wipe off dust, dirt, and moisture with a
lint-free cloth.
If you must use a cleaning solution, make sure it is formulated
for tape cartridges. Never allow the solution to touch the tape.
•
If a leader block comes off and there is no other damage, you
can use a leader block repair kit to reattach the block. You
can then use the cartridge one more time to copy the data
onto a new cartridge.
•
If a label starts to peel, replace it immediately.
•
Do not write on a label that is on a cartridge. Write a new
label, remove the old one, and replace it with the new one.
Managing the system
3-13