Xerox DocuPrint 100 Operator's Manual page 105

Operator Guide
4. Locate the fuser agent reservoir.
5. Pull the fuser agent reservoir out until it stops.
6. Remove the reservoir cap by turning it counterclockwise.
7. Remove the cap from a new bottle of fuser agent.
If any fuser agent spills on the floor, remove it immediately.
Fuser agent spills make the floor slippery.
The fuser reservoir has an antisplash seal. Do not push the fuser
agent bottle into the reservoir with excessive force, as this can
damage the seal.
Maintaining the system
WARNING
CAUTION
4-7