Operator Guide
3. For the processor feeder trays, press the green lever to
unlatch the paper feeder assembly.
4. Remove and discard any partially fed paper. Ensure that:
•
The paper supply is neatly stacked.
•
The stack is not higher than the MAX line on the length
guide.
•
The length guide is firmly touching the back edge of the
stack.
•
For the high capacity feeder trays, also ensure the side
guide is firmly touching the side of the stack.
NOTE: You do not need to discard transparencies and other
stiff materials unless they are damaged.
Troubleshooting
5-43