Paper sizing and print speed
Long and short edge feeding
Operator Guide
The printer paper trays have edge guide sensors that detect
paper length and width. The system selects correct paper trays
for the print job based on the paper size specified in the job, as
follows:
•
If an exact match is found, the print job continues.
•
If an exact match is not found, the programmer can specify in
the job for the printer to do one of the following:
– Stop printing the job and print an error sheet.
– Print the data on an oversized sheet.
If you encounter any problems related to paper sizing, contact
your lead operator or Xerox service representative.
To feed through the printer, the leading edge of the paper must
be at least 10 inches long. Therefore, the following standard
sizes of paper must be loaded so that sheets feed long edge
first:
•
7 by 10 inch
•
B5
•
A4
•
US Letter
•
B4
•
US Legal
The following papers, which have long edges greater than 14.33
inches / 364 mm must feed short edge first:
•
A3
•
US Ledger or US Tabloid
NOTE: JIS B4 can be fed either long edge or short edge first.
Overview
1-43