Rebooting The System (Warm Boot); Performing A Deferred Shutdown And Reboot - Xerox DocuPrint 100 Operator's Manual

Rebooting the system (warm boot)

Performing a deferred shutdown and reboot

Operator Guide
2. Right click again in the queue list section, and select [Accept
Jobs].
3. Right click in the queue list section, and select [Release
Jobs].
1. On the DocuSP Print Services window, click the [Queue
Manager] icon.
2. Hold all queues. (Refer to "Holding queues," earlier in this
chapter.)
3. On the DocuSP Print Services window, select [Exit] from the
System menu. All GUI windows disappear.
4. Open a Terminal window, as follows:
a. Right click on the screen background.
b. From the Workspace pop-up menu, select [Tools].
c. From the Tools menu, select [Terminal].
5. In the Terminal window, log on as root user.
6. Enter:
sync; sync; reboot
7. When the DocuSP Print Service window reopens, log on as
Trusted User or Administrator.
8. Power on the printer by selecting [Printer On] from the Printer
menu.
9. Release all held queues. (Refer to "Releasing queues,"
earlier in this chapter.)
Use this procedure when the system requests a reboot during a
recovery, and you want to wait for queued jobs to finish printing.
1. On the DocuSP Print Services window, log on as
Administrator or Trusted User.
2. Hold any active queues. (Refer to "Holding queues," earlier in
this chapter.)
3. On the DocuSP Print Services window, select [Shutdown]
from the System menu.
Managing the system
3-3