Support And Interface With Feeders - Xerox DocuPrint 100 Operator's Manual

Overview
Paper stocks
supported on
bypass transport
DFA support
1-28
Figure 1-15. Printer with inverter feeder/stacker + feeder/
stacker + feeder/stacker + bypass transport
The illustrations above show a printer with two feeder/stacker
modules and a bypass transport, and a printer with three feeder/
stacker modules and a bypass transport. With the bypass
transport installed, the printer can support up to three feeder/
stacker modules, including the inverter feeder/stacker.
The bypass transport accepts all paper stocks on which the
printer can print, and it accommodates simplex and duplex
printing.
The bypass transport meets the Xerox Document Feeding and
Finishing Architecture (DFA) specifications. The system software
supports DFA. However, in order for the bypass transport to
function correctly, you need to set up finishing personality
profiles to identify your finishing device to the printing system.
(The customer support representative for your finishing device
can give you the information you need to create a personality
profile for your third-party finishing device.)

Support and interface with feeders

For information on marketing partners that provide solutions for
support and interface with feeders, contact your local Xerox
sales representative.
NOTE: The input enablement device is NOT an option on the
Xerox DocuPrint 155 and 180 EPS.
The input enablement device is available only for the Xerox
DocuPrint 100, 115, and 135 EPS.
Operator Guide