Xerox DocuPrint 100 Operator's Manual page 55

Processor
Operator Guide
The Sun Blade workstation controller contains the following
hardware components:
• Processor (system unit) containing the following:
– One or two UltraSPARC high-speed processing unit
(CPU) modules
– One or two 1-GB memory modules
NOTE: In Xerox Europe, all printers use a 2 GB memory
configuration.
– Hard disk drive
– High-density, read-only DVD-ROM drive
– Diskette drive (Sun Blade 1000/2000 only)
– Ethernet
– One or two Printer Controller Interface (PCI) boards to
interface with the printer
– Video graphics board
• Universal Serial Bus (USB) keyboard and three-button
mouse
• 17-inch flat panel monitor
• External diskette drive (Sun Blade 2500 only)
The central processing unit contains the memory, internal disk
drive, a graphics board, a DVD-ROM drive, a diskette drive,
power receptacle and outlet, connectors, and ports.
• Memory: One or two 1-GB Dual In-line Memory Modules, or
DIMMs, are provided as a standard feature of the processor.
• Hard disk drive: The internal hard disk drive stores the
operating system software, the NPS/IPS Extension
application, and any queued print jobs are stored on the
internal disk. This disk cannot be used to store other
applications or data except as directed by your service
representative.
• Diskette drive: Diskettes are used to install fonts and to load
files to, and back up files from, the internal disk drive. The
diskette drive uses industry standard 3.5 inch, 1.44 MB,
double-sided, high-density diskettes.
NOTE: On the Sun Blade 2500, the diskette drive is external,
and plugs into the processor back panel.
Overview
1-35