Operator Guide
3. Place the paper in the tray, following the instructions on the
labels.
1
2
Figure 2-5. Tray labels
1. Paper edge guide lines
2. Loading instructions
Do the following:
•
Remove any damaged sheets.
•
Trays 1 and 2: Load paper with the wrapper seam side
up.
Trays 3, 4, 5 and 6: Load paper with the curl side up. If
you do not see any curl, load the paper with the wrapper
seam side down.
•
Fan predrilled paper fan thoroughly and remove any paper
plugs.
•
Load transparencies and 9-inch / 229 mm tabs into trays 1
and 2 only.
Managing the printer
2-5