Changing From A Desktop To A Minitower Configuration - Compaq Professional Workstation AP200 Reference Manual

Changing from a Desktop to a
Minitower Configuration
1. Turn off the workstation and any external devices. Disconnect the power
cord from the grounded AC outlet. Disconnect the network cable and
any external devices from the system.
2. Remove the workstation access panel.
3. Remove the front bezel.
4. Disconnect all power and data cables from the drives in the 5.25-inch
drive bays.
5. To release the drives from the 5.25-inch drive bay, press the drivelock as
shown.
Figure 4-7. Releasing the drives with the drivelock
6. While pressing the drivelock, pull the drives out of the drive bay.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Professional Workstation AP200 Reference Guide
4-11