Changing From A Desktop To A Minitower Configuration - Compaq Evo D510 MT Hardware Reference Manual

Product Features
Ä

Changing from a Desktop to a Minitower Configuration

1–10
CAUTION: Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.
Changing from a Minitower to a Desktop Configuration
12. Replace the subpanel, front bezel, and the computer access panel.
13. Reconnect the external equipment.
1. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
2. Remove the computer access panel as described in the section
"Removing the Computer Access Panel."
3. Remove the front bezel as described in the section "Removing the
Front Bezel."
Hardware Reference Guide