Getinge MODUEVO Instructions For Use Manual page 55

5.7 Setting the lighting on the PLG-II
Fig. 14: Setting the lighting on the PLG-II
5.8 Control panel for SOMNUS Light
Fig. 15: Control panel for SOMNUS Carrier
Moduevo
IFU 009001001 EN 13
2
3
N
O T E
The premium dimmer light control panel can only be installed with the Mezzo or
SKY distribution modules. For SLIM or TWIN distribution modules, a wall mounted
premium dimmer light control panel should be used.
Setting the lighting on the PLG-II
Switch on the lighting
1. Press the [ON / OFF]
PLG-II.
Ø The light is switched on.
Adjusting brightness
1. Press the [+]
Ø Brightness is increased.
2. Press the [-]
1 Ø Brightness is decreased.
Switching off the lighting
1. Press the [ON / OFF]
PLG-II.
Ø The light is switched off.
In case SOMNUS Carrier is configured, the
premium dimmer light control panel should be
configured accordingly.
1. The wall mounted premium dimmer light
control panel is available and optional.
2. Beam light, distributor light and floor light
can be adjusted with the control panel as
well.
Operation and use
button on the
1
button on the PLG-II.
2
button on the PLG-II.
3
button on the
1
55 / 104
5