Getinge MODUEVO Instructions For Use Manual page 34

Product configuration
3
Modules of the medical ceiling supply units
3.1.4 Product variant: MODUEVO Screen holder solution
Screen holder solution is a display screen system, it is consist of the ENERGY beam or spring
beam and MODUEVO screen holder or PHILIPS Screen holder.
Please refer to Instructions For Use of MODUEVO Screen Holder Solution for more information.
Illustration
Tab. 11: MODUEVO Screen holder solution
3.1.5 Product variant: CARGOLIFT
CARGOLIFT is a lift system with which an anesthesia machine or endoscopy trolley can be lifted.
CARGOLIFT may only be mounted to the distributor module TWIN.
Illustration
Tab. 12: CARGOLIFT
34 / 104
Description
There are three modes as:
▪ ENERGY beam+ MODUEVO Screen holder
▪ ENERGY beam+ PHILIPS Screen holder
▪ ONDAL spring beam+ MODUEVO screen holder
For MODUEVO screen holder, there are multiple kinds
of modes for large Screen or small screens.
Description
The following anesthesia machines and endoscopy trol-
leys from other manufacturers may be lifted with CAR-
GOLIFT:
▪ ADU / AESTIVA (GE Datex)
▪ Primus / Julian (Dräger)
▪ Endoscopy trolley (ITD)
▪ Aisys CS2 (GE)
▪ Carestation 650c (GE)
▪ FLOW-I C40 (MAQUET)
Another specific docking module can carry the anes-
thesia machine:
▪ Atlan A300/350 (ceiling-mounted versions) (Dräger)
▪ Perseus A500 (Dräger)
The sales representative need to not only check the In-
Max.: 400 mm
terface of anesthesia machine or endoscopy trolley
matches the docking unit, but also check the technical
specification of anesthesia machine or endoscopy trolley
including the weight and barycenter meet the require-
ments as below;
▪ the weight of the medical devices (e.g. anaesthesia
machine, endoscopy trolley) is subject to maximum
load presented by the label attached on the docking
system, and the distance from the barycentre of med-
ical devices mounted to the mounting holes should be
less than 400 mm.
Moduevo
IFU 009001001 EN 13