Getinge MODUEVO Instructions For Use Manual page 30

Product configuration
3
Modules of the medical ceiling supply units
Illustration
Tab. 8: Distributors modules
30 / 104
Description
TWIN distributor module
▪ Large distributor module
▪ 6 panels
▪ 4 EPoS rails
TWIN is available in the following lenghts:
▪ 400 mm
▪ 600 mm
▪ 800 mm
▪ 1200 mm
TWIN distributor module with docking system
▪ TWIN with docking system can only be configured in
combination with ENERGY.
Is available in the following lenghts:
– 400 mm
– 600 mm
– 800 mm
▪ With the docking system, the below medical devices
may be docked to the distributor module and raised:
– Primus (Dräger)
– Endoscopy trolley (ITD)
– Carestation 650c (GE)
– FLOW-I C40 (MAQUET)
Max.: 300 mm
The sales representative need to not only check the In-
terface of anesthesia machine or endoscopy trolley
matches the docking unit, but also check the technical
specification of anesthesia machine or endoscopy trolley
including the weight and barycenter meet the require-
ments as below;
▪ the weight of the medical devices (e.g. anaesthesia
machine, endoscopy trolley) is subject to maximum
load presented by the label attached on the docking
system, and the distance from the barycentre of med-
ical devices mounted to the mounting holes should be
less than 300 mm.
PLG-II distributor module
▪ The PLG-II distributor module can be height adjusted
via the hinge and is mounted directly to the spacer
tube. PLG-II only provides mounting points for con-
nections.
Moduevo
IFU 009001001 EN 13