Automatic Systems TRS373 Technical Manual page 6

p. 6/48
2. GENERAL SYMBOLS
The following symbols are used in this manual or as labels on the equipment:
This symbol is used to highlight a tip that may help you to better understand the product.
This symbol is used to highlight an important instruction for the correct use and/or maintenance
of the product.
This symbol is used to highlight a risk of electric shock or electrocution.
This symbol is used to highlight a risk of cutting yourself.
This symbol
(Either in the form of an affixed label or directly engraved on a mechanical part)
This symbol is used to indicate the tool that must be used for the concerned operation.
This symbol indicates that the equipment complies with European standards and directives.
This symbol indicates that the equipment must be disposed of in accordance with applicable
European Directives (EU WEEE Directive 2012/19).
TRS373
Model
xx/xx/17
Mfg Date
1
Phases
230
Volts
E/Txxx/STD
Item
17-TRS373-B0000
Serial
SN
MADE IN FRANCE
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice.
TRS373-MT-EN-01
is used to
65
kg
50/60
Hz
2
A
www.automatic-systems.com
identify the
Product identification label.
ground connection point.
p. 6/48