Advertisement
p. 26/48
4. INSTALLATION
4.1. EQUIPMENT STORAGE BEFORE INSTALLATION
Before installation, protect equipment from impact and store it in its original packaging in a dry area protected from
dust, heat, and weather.
Storage temperature limits: -30 to +80 °C.
4.2. RECOMMENDED TOOLS
•
Electrician tool kit.
•
Flat spanner set.
•
Socket and bit set.
•
Soft face hammer of 500 g
•
Percussion drill + drill bits Ø12x100 (for fixing the reinforcement spacers) + drill bits Ø15x100 (for
fixing to the ground with template).
•
Spirit level.
•
Stepladder or small folding ladder.
•
Forklift. (For positioning the housing containing mechanical parts)
•
Application gun for the adhesive cartridge (heel guard option).
•
Standard protective equipment: safety gloves, goggles, hard hat and footwear.
One extra person will be needed to position the various vertical elements until the the upper
housing has been removed and fixed.
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice.
TRS373-MT-EN-01
p. 26/48
Advertisement
Need help?
Do you have a question about the TRS373 and is the answer not in the manual?
Questions and answers